The first group includes the most used parameters such
as startup acceleration, minimum and maximum
speeds, and so on.
The motor rated values include voltage, current, power
factor, frequency, speed and default direction of
rotation, which are often entered from the motor plate.
The digital and analog inputs/outputs are signal
terminals, which are set according to the usage.
Specific system parameters include method of
acceleration and stopping, application of the inverter,
and so on.
This category is related to the protective functions, such
as motor overload protection, over-temperature
protection, lock-prevention protection, etc.
This section shows the enabled or disabled digital
inputs/outputs of the inverter.
The history of the system faults and some of the
quantities are checked in this section. In this category,
the parameters are read-only.
History, and
fault values
Table 9: Parameters categories of Xima-L100 device
Note that the number of parameters is not continuous which is because we may add some
parameters in future versions of the device.
Some of the parameters in this manual may not be available in your device. For more
information contact the company.
To Next Page
Loading...