Modules
Thunderbolt Port Driver 6 - 45
6
Thunderbolt Port Driver
If you have included the Thunderbolt 3 combo port (factory option) in your pur-
chase configuration then you need to install the driver.
Before installing the Thunderbolt driver it is necessary to initialize the port first.
To do so simply insert any USB Type C device (e.g. a USB flash drive) into the
combo port (see Figure 1 - 13 on page 1 - 22). You may then install the driver as
below.
1. Insert the Device Drivers & Utilities + User’s Manual disc into an attached
DVD drive.
2. Click Option Drivers (button).
3. Click 4.Install Thunderbolt Driver > Yes.
4. Click the check box to accept the license and then click Install.
5. Click Finish.
6. See also “Intel(R) Thunderbolt Technology (Advanced Menu > Intel(R)
Thunderbolt)” on page 5 - 12 for Thunderbolt port configuration in the
BIOS.
7. See over for further information.
To Next Page
Loading...