Storage Devices, Mouse, & Audio
2 - 6 Audio Features
2
5. Plug in the speaker cables (you may require an adapter to connect each cable to
the appropriate jack e.g a stereo mini to dual RCA adapter) from your speakers
into the jacks as follows:
• 2-In-1 Audio Jack (Line-Out & S/PDIF Combo) = Front Speaker Out
• Microphone-In Jack = Center/Subwoofer Speaker Out
• Headphone Jack = Rear Speaker Out
6. As you plug in each cable a dialog box will pop u.
7. Click to put a check in the appropriate box according to the speaker plugged-in
(e.g. Rear Speaker Out), and then click OK to save the setting.
8. Click OK to exit Realtek HD Audio Manager.
9. See Sound Blaster Audio (“Setup for External Speakers/Headphones” on
page 6 - 48) for information on configuring the audio for the best sound balance
when using external speakers/headphones.
To Next Page
Loading...