XO FLEX – Instructions for use Operation
24
Figure 21 Attaching the irrigation tube
OPERATION
Lift the motor forward and control it with the foot control.
Activate the motor clockwise in the range 100 RPM – select maximum speed
3
(see below) with ⮕
or counterclockwise with ⬅.
See the maximum speed on the display when the foot control is not activated. See the actual
speed on the display when the motor is running.
Figure 22 – Foot control of XO OSSEO motor
Switch irrigation on/off with X.
Choose between three levels of irrigation:
Increase amount of irrigation with ►.
Decrease amount of irrigation with ◄.
To avoid necrosis, it is generally recommended to work with an amount of irrigation
of at least 50 ml per minute measured with the contra-angle fitted!
Choose between three maximum speed levels:
Increase maximum speed with ▲.
Decrease maximum speed with ▼.
3
Please note that this is the speed of the motor itself. When you fit a contra-angle the speed of the bur may be changed!
To Next Page
Loading...
