Xo FLEX - Technical Specifications Overview

XO FLEX – Instructions for use Dimensions and technical data
90
13.2 TECHNICAL SPECIFICATIONS
Table 18 – Technical specifications
Part
Specification
Instrument bridge
Number of instruments
< 6
Force to move the instrument bridge
corresponding to
400 g – 1,500 g
Luzzani syringe
Water
20 – 100 ml/min + 20%
Air
10 – 100 %
Other
See luzzani.com
Heating element, maximum power loading
100 W
Bien-Air MC3 micromotor
Rotational speed
Variable in the range 100 – 40,000 RPM + 10%
Torque (contra-angle gear ratio 1:1)
2.5 Ncm
Spray water (without contra-angle)
20 – 70 ml/min + 20%
Spray air (without contra-angle)
10 – 100 %
Cooling air
10 l/min
Contra angles according to
ISO 3964, type 2 or type 3
Other
See bienair.com
Bien-Air MX2 micromotor
Rotational speed
Variable in the range 100 – 40,000 RPM + 10%
Torque (contra-angle gear ratio 1:1)
2.5 Ncm
Spray water (without contra-angle)
20 – 70 ml/min + 20%
Spray air (without contra-angle)
10 – 100 %
Cooling air
10 l/min
Contra angles according to
ISO 3964, type 2 or type 3
Other
See bienair.com
XO OSSEO motor
Rotational speed
Variable in the range 100 – 40,000 RPM + 10%
Output power
125 W
Torque (contra-angle gear ratio 1:1)
6.5 Ncm + 20%
Irrigation (XO Peristaltic Pump)
10 – 90 ml/min + 20%
Cooling air
None
Contra angles according to
ISO 3964, type 1
Air instrument
Drive air flow
55 nl/m; 3.2 bar
Drive air adjustment
One step in the range 50 – 100 %
Spray water (without contra-angle)
20 – 70 ml/min + 20%
Spray air (without contra-angle)
10 – 100 %
Turbine hand-pieces and other air
instruments according to
ISO 9168:2009, type 3
XO ODONTOSON
Type
Magnetostrictive with ferrite rod
Amplitude of instrument movement
10 – 20 µm
Instrument movement pattern
Circular
Instrument frequency
42 kHz
Instrument material
Titanium
Power setting
One step in the range 10 – 100 %