Xylem hydrovar User Manual

P42 SEL.INVERTER
G
Select the desired inverter unit (1-8).
P42 SEL.INVERTER
1
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
P43 TEMP.INVERTER
G
Shows the temperature inside the selected (by mean of parameter 42) unit,
P43 TEMP.INVERTER
XX% XX°C
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
with the following data:
• Temperature inside (°C)
• % of the maximum temperature
P44 CURR.INVERTER
G
Shows the output current in percentage of the maximum rated current for the selected (by
mean of parameter 42) unit.
P44 CURR.INVERTER
XXX %
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
P45 VOLT.INVERTER
G
Shows the input voltage (V) for the selected (by mean of parameter 42) unit.
P45 VOLT.INVERTER
XXX V
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
P46 OUTPUT FREQ.
G
Shows the output frequency (Hz) for the selected (by mean of parameter 42) unit.
8 Programming
HVL 2.015-4.220 Installation, Operation, and Maintenance Manual 53

Xylem hydrovar Specifications

General

Frequency	50/60 Hz
Control type	Variable speed drive
Protection class	IP55
Communication protocols	Modbus
Relative Humidity	5% - 95% (non-condensing)
Altitude	Up to 1000 m without derating
Input voltage	200-690 V AC
Storage Temperature	-25°C to +70°C (-13°F to 158°F)