Xylem hydrovar User Manual

1 Introduction and Safety
1.1 Introduction
Purpose of this manual
The purpose of this manual is to provide necessary information for:
• Installation
• Operation
• Maintenance
CAUTION:
Read this manual carefully before installing and using the product. Improper use of the
product can cause personal injury and damage to property, and may void the warranty.
NOTICE:
Save this manual for future reference, and keep it readily available at the location of the
unit.
1.1.1 Qualified personnel
WARNING:
This product is intended to be operated by qualified personnel only.
• Correct and reliable transport, storage, installation, operation, and maintenance are
required for the trouble-free and safe operation of the frequency converter. Only
qualified personnel are allowed to install or operate this equipment.
• Qualified personnel are defined as trained staff, who are authorized to install,
commission, and maintain equipment, systems, and circuits in accordance with
pertinent laws and regulations. Also, the personnel must be familiar with the
instructions and safety measures that are described in this document.
• Persons with diminished capacities should not operate the product unless they are
supervised or have been properly trained by a professional.
• Children must be supervised to ensure that they do not play on or around the product.
1.2 Safety
WARNING:
• The operator must be aware of safety precautions to prevent physical injury.
• Operating, installing, or maintaining the unit in any way that is not covered in this
manual could cause death, serious personal injury, or damage to the equipment. This
includes any modification to the equipment or use of parts not provided by Xylem. If
there is a question regarding the intended use of the equipment, please contact a
Xylem representative before proceeding.
• Do not change the service application without the approval of an authorized Xylem
representative.
CAUTION:
You must observe the instructions contained in this manual. Failure to do so could result
in physical injury, damage, or delays.
1 Introduction and Safety
4 HVL 2.015-4.220 Installation, Operation, and Maintenance Manual

Xylem hydrovar Specifications

General

Frequency	50/60 Hz
Control type	Variable speed drive
Protection class	IP55
Communication protocols	Modbus
Relative Humidity	5% - 95% (non-condensing)
Altitude	Up to 1000 m without derating
Input voltage	200-690 V AC
Storage Temperature	-25°C to +70°C (-13°F to 158°F)