Xylem hydrovar User Manual

P1319 DATE
P1319 DATE
XX.XX.20XX
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
Using this parameter current date can be set.
P1320 TIME
P1320 TIME
HH.MM
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
Using this parameter current time can be set.
P1321 AUTO-START
P1321 AUTO-START
ON
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
If AUTO-START = ON, then the HYDROVAR starts automatically (in case of demand) after
reconnection of power following disconnection.
P1322 START-UP COMPLETED?
P1322 START-UP COMPLETED?
No
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
If the user configured the whole application by selecting “YES” then the HYDROVAR will
not make available the Start-up menu at every power-on.
By selecting "NO" at next power-on, the HYDROVAR will offer to the user the start-up
procedure.
P1323 ADDRESS
P1323 ADDRESS
1
Actual Value Output Freq.
Left fct. Up fct. Down fct. Right fct.
Sets the desired address (possible setting 1 - 247) for the user interface.
8 Programming
HVL 2.015-4.220 Installation, Operation, and Maintenance Manual 97

Xylem hydrovar Specifications

General

Frequency	50/60 Hz
Control type	Variable speed drive
Protection class	IP55
Communication protocols	Modbus
Relative Humidity	5% - 95% (non-condensing)
Altitude	Up to 1000 m without derating
Input voltage	200-690 V AC
Storage Temperature	-25°C to +70°C (-13°F to 158°F)