XYZ Machine Tools SMX 5000 User Manual

3
XYZ Machine Tools Ltd
XYZ Bed Mill Safety, Installation, Maintenance, Service & Parts List Manual
3. If trapped by spindle or tool, remove the compressed air supply to the machine and rotate the
spindle by hand to free the trapped person.
4. If trapped by the axes, use the manual handwheels to move the axes slowly clear of the trapped
person.
5. If no manual handwheels are fitted, reset the E-stop and put the control into DRO mode. Use the
Electronic Handwheels to move the axes slowly clear of the trapped person.
1.4 Danger, Warning, Caution, and Note Labels and Notices Used in this
Manual
DANGER - Immediate hazards that will result in severe personal injury or death. Danger labels on the
machine are red in colour.
WARNING - Hazards or unsafe practices that could result in severe personal injury and/or damage to
the equipment. Warning labels on the machine are amber in colour.
CAUTION - Hazards or unsafe practices that could result in minor personal injury or equipment/product
damage. Caution labels on the machine are Yellow in colour.
NOTE - Call attention to specific issues requiring special attention or understanding.
Safety & Information Labels Used on SMX Bed Mills
It is forbidden by law to deface, destroy or remove any of these labels

XYZ Machine Tools SMX 5000 Specifications

General

Brand	XYZ Machine Tools
Model	SMX 5000
Category	Power Tool
Language	English