Yamaha e60hmhd - Disassembling the Propeller Shaft Housing Assembly

PROPELLER SHAFT HOUSING ASSEMBLY
E
DISASSEMBLING THE PROPELLER
SHAFT HOUSING ASSEMBLY
1. Remove:
• Reverse gear
A For USA and CANADA
B Except for USA and CANADA
2. Remove:
• Ball bearing 1
A For USA and CANADA
B Except for USA and CANADA
3. Remove:
• Needle bearing
Slide hammer set:
YB-06096................................
1
Bearing separator:
90890-06534...........................
2
Guide plate:
90890-06501...........................
3
Stopper guide stand:
90890-06538...........................
4
Bearing puller:
90890-06535...........................
5
Small universal claws:
90890-06536...........................
6
Slide hammer set:
YB-06096.................................
2
Stopper guide plate:
90890-06501............................
3
Bearing puller:
90890-06535............................
4
Stopper guide stand:
90890-06538............................
5
Driver rod:
YB-06071/90890-06652..........
1
Needle bearing attachment:
YB-06153/90890-06612..........
2
B
A
B
A
6-16