Yamaha e60hmhd - Assembling the Lower Case Assembly; Checking the Lower Case

LOWER CASE ASSEMBLY
E
CHECKING THE BEARING
Check:
• Bearing
Pitting/rumbling ➔ Replace.
CHECKING THE SLEEVE
Check:
• Sleeve
Wear/damage ➔ Replace.
CHECKING THE LOWER CASE
1. Clean:
• Gear case
Use a soft brush and solvent.
2. Check:
• Water passage
Mineral deposits/corrosion ➔ Clean.
3. Check:
• Lower case
Cracks/damage ➔ Replace.
ASSEMBLING THE LOWER CASE
ASSEMBLY
1. Install:
• Forward gear shim 1
• Forward gear bearing outer race 2
2. Install:
• Drive shaft needle bearing
NOTE:
Install the bearing with its manufacture’s
marks or numbers facing outward.
Driver rod:
YB-06071/90890-06605.........
3
Bearing installer:
YB-06276/90890-06621.........
4
6-28