– 13 –
Recoil starter
The recoil starter is used to start the engine.
Pull the recoil starter slowly until it is engaged, then
pull it briskly.
1 Recoil starter handle
NOTICE
9 Pull the recoil starter handle straight.
9 Return the recoil starter handle slowly.
9 Do not touch the recoil starter handle while the
generator is operating.
1
000-000
Voltage adjuster
The voltage adjuster is equipped for adjusting output
voltage to rated voltage.
TIP
Turn the voltage adjuster clockwise or counterclock-
wise to increase or decrease output voltage.
To Next Page
Loading...
