Yamaha F100D - Tightening torques

SPEC
Specifications
2-11
6D93G11
Tightening torques
2
Specified torques
Part to be tightened Thread size
Tightening torques
N·mkgf·mft·lb
Fuel system
Fuel filter cup — 30.32.2
Fuel pump mounting bolt M6 10 1.0 7.4
Fuel pump screw M6 4 0.4 3.0
Sensor assembly screw M5 3.7 0.37 2.7
Idle speed control screw M5 3.7 0.37 2.7
Fuel rail mounting bolt M6 8 0.8 5.9
Throttle body mounting bolt M6 8 0.8 5.9
Fuel cooler screw M6 3 0.3 2.2
Float chamber screw M5 3 0.3 2.2
Vapor separator drain screw — 1.5 0.15 1.1
Pressure regulator bolt M6 5 0.5 3.7
Fuel hose joint — 40.43.0
Plate screw M4 2 0.2 1.5
Wiring harness holder screw M4 2 0.2 1.5
Pressure check valve — 10 1.0 7.4
Power unit
Power unit mounting bolt
1st
M10
42 4.2 31.0
2nd 42 4.2 31.0
Apron screw M6 4 0.4 3.0
Flywheel magnet nut M24 215 21.5 158.6
Starter motor bolt M8 29 2.9 21.4
Spark plug wire cover screw M6 4 0.4 3.0
Starter relay lead bolt M6 4 0.4 3.0
Starter relay holder screw M6 3 0.3 2.2
Main and fuel pump relay screw M6 3 0.3 2.2
Oil pressure switch — 80.85.9
Oil pressure switch lead bolt M4 2 0.2 1.5
PTT relay lead nut M6 4 0.4 3.0
PTT motor lead bolt M6 4 0.4 3.0
Positive battery lead nut M8 9 0.9 6.6
Timing belt tensioner bolt M10 39 3.9 28.8
Drive sprocket nut M40 265 26.5 195.5
Driven sprocket bolt M10 60 6.0 44.3
Camshaft cap bolt
1st
M7
80.85.9
2nd 17 1.7 12.5
Cylinder head cover plate screw M4 2 0.2 1.5
Cylinder head cover bolt
1st
M6
80.85.9
2nd 8 0.8 5.9