69J1D11
6-12
1
2
3
4
5
6
7
8
9
3. Remove the oil seals and needle bear-
ing.
Checking the propeller shaft housing
1. Clean the propeller shaft housing using a
soft brush and cleaning solvent, and then
check it for cracks or damage. Replace if
necessary.
2. Check the teeth and dogs of the reverse
gear for cracks or wear. Replace the
gear if necessary.
3. Check the bearings for pitting or rum-
bling. Replace if necessary.
Checking the propeller shaft
1. Check the propeller shaft for bends or
wear. Replace if necessary.
2. Check the dog clutch, shift rod joint, and
shift slider for cracks or wear. Replace if
necessary.
Oil seal installer
4
: YB-06168
Driver handle
5
: YB-06071
È
S69J6105
S69J6110
S69J6115
Propeller shaft housing (regular rotation model)
To Next Page
Loading...
Need help?
General
