PREPARATIONS ➤ Connecting to a network wirelessly (RX-V577 only) En 35
3
Use the cursor keys (q/w) to select “Security” and
the cursor keys (e/r) to select the encryption
method.
Choices
None, WEP, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (AES),
Mixed Mode
• If you select “None”, the connection may be insecure since the
communication is not encrypted.
4
Use the cursor keys (q/w) to select “Security Key”
and press ENTER.
• If you select “None” in step 3, this item is not available.
5
Use the cursor keys and ENTER to enter the
security key.
If you select “WEP” in step 3, enter either 5 or 13 character
string, or 10 or 26 hexadecimal digits.
If you select the method other than “WEP” in step 3, enter
either 8 to 63 character string, or 64 hexadecimal digits.
When finished entering the key, select “OK” to return to the
previous screen.
6
Use the cursor keys (q/w) to select “Connect” and
press ENTER to start the connection process.
When the connection process finishes, “Completed”
appears on the TV screen.
If “Not connected” appears, check that all the information is
entered correctly, and repeat from step 1.
7
To exit from the menu, press SETUP.
Network Connection
OK
CANCEL
CLEAR
abc_
( ) [ ] { } < > * ! ? # % &
. , : ; _ | / \ $ ~^´ ’ `
0 1 2 3 4 5 6 7 8 9 + - =
← Aa BKSP Space DEL →
a b c d e f g h i j k l m
n o p q r s t u v w x y z
To Next Page
Loading...
