Yamaha RX5 - Page 34

зо
SONG OPERATIONS
5. The Mark is now set, and you can press +1/YES to move on to the next Part and
continue editing, or press PATTERN/SONG to exit the Edit Song Mode.
* Marks can be entered AFTER all the Pattern numbers have been entered for а Song.
Refer to the INSERT FUNCTION (described earlier in this chapter} and enter the Mark
in the normal way, after pressing the INSERT key. Remember that a Mark will create
a new Part, and move al! subsequent Parts forward
JOB #03: SONG NAME
FUNCTION 7o enter a name for а selected Song.
This function lets you enter a name of up to eight characters (letters and numerals) for
a Song.
JOB #04 INITIAL TEMPO
FUNCTION то set the initial tempo of a selected Song.
This function lets you set the exact tempo for a Song, thus avoiding the need for manually
changing tempos between playback of Songs. Or if you connect Songs to make a Chain,
this ensures that each Song will play at its correct tempo. Of course, any Tempo Change
commands you have included in the Song will function (within the limits of the RX5's
tempo range) and you can also vary the Tempo manually at any time.
OPERATION
1. Press PATTERN/SONG until the LCD indicates Song Mode, then use the Numeric
Key Pad to select the Song that is to be named.
2. Press REAL TIME WRITE/EDIT SONG to enter the Edit Song Mode, and select Job
#03.
EDIT SONG 06
E
Name-> š
<
* |f the selected Song already has a name, it will be displayed, апа can be changed
in exactly the same way as entering a new name.
3. Enter letters by pressing the instrument keys (for letters A thru X) or ACCENT 1 or 2
(for letters Y and Z respectively). The cursor will move to the right when a letter is
entered, enabling you to enter the next letter.
Letters are entered as upper case (capitals). Lower case letters may be entered by
holding down STOP/CONTINUE while entering letters.
Numerals may be entered by using the Numeric Key Pad.
Spaces may be entered by using the REVERSE key
Periods may be entered by using the DAMP key.
if you make a mistake, use the — 1/NO and +1/YES keys to move the cursor to the
erroneous character, and enter a new character.
4. Press START to enter the new name. The LCD will return to the EDIT SONG display.
Б. Press PATTERN/SONG to exit the Edit Song Mode
OPERATION
1. Press PATTERN/SONG until the LCD indicates Song Mode, then use the Numeric
Key Pad to select the Song which is to have its Initial Tempo set.
2. Press REAL TIME WRITE/EDIT SONG to enter the Edit Song Mode, and select Job
#04.
EDIT SONG йд
Init Tempo OFF
Uu
On/Off indicator
* If the Initial Tempo has already been set, the LCD will show "Init Tempo ON". You
can now alter the Initial Tempo setting, in exactly the same way as entering the setting
for the first time. Or you can press —1/NO to turn the Initial Tempo function OFF.
о
. Press +1/YES to turn the Initial Tempo function ОМ.
4. Press START. The LCD will show the current setting of the RX5's Tempo.
® If the Initial Tempo was already set, the LCD will show its value. Example: 120 quarter-
notes per minute.
EDIT SONG 69
Init Tempo J=1294
L— m
Initial tempo value
5. Use the Numeric Key Pad to set the Initial Tempo. Range: 40 — 250 quarter-notes
per minute.
6. Press START again to enter the Initial Tempo. The LCD will return to the EDIT SONG
display, showing the first Part of the Song.