4-39
FRONT FORK
CHAS
WARNING
NOTE:
WARNING
EAS00649
REMOVING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Stand the motorcycle on a level surface.
Securely support the motorcycle so that
there is no danger of it falling over.
Place the motorcycle on a suitable stand so that
the front wheel is elevated.
2. Loosen:
cap bolt
1
upper bracket pinch bolt
2
lower bracket pinch bolt
3
front turn signal pinch bolt
4
Before loosening the upper and lower
bracket pinch bolts, support the front fork
leg.
3. Remove:
front fork leg
DISASSEMBLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Remove:
cap bolt
O-ring
spacer
1
spring seat
2
fork spring
3
2. Drain:
fork oil
3. Remove:
dust seal
1
oil seal clip
2
(with a flat-head screwdriver)
To Next Page