2-10
CHASSIS SPECIFICATIONS
SPEC
Item Standard Limit
Front brakes
Brake type
Operation
Brake lever free play (at lever end)
Recommended fluid
Brake discs
Diameter thickness
Min. thickness
Max. deflection
Brake pad lining thickness
Master cylinder inside diameter
Caliper cylinder inside diameter
Single-disc brake
Right-hand operation
5 8 mm
DOT 4
282 5 mm
6.2 mm
12.7 mm
25.4 mm and 30.1 mm
4.5 mm
0.15 mm
0.8 mm
Rear brake
Brake type
Operation
Drum inside diameter
Shoe thickness
Shoe spring free length
Leading, trailing brake
Right-foot operation
130 mm
4 mm
50.5 mm
131 mm
2 mm
Front suspension
Suspension type
Front fork type
Front fork travel
Spring
Free length
Spacer length
Installed length
Spring rate (K1)
Spring stroke (K1)
Optional spring available
Fork oil
Recommended oil
Quantity (each front fork leg)
Level (from the top of the innertube,
with the inner tube fullycompressed,
and without the fork spring)
Telescopic fork
Coil spring/oil damper
140 mm
304.4 mm
180 mm
299.4 mm
5.2 N/mm (0.52 kg/mm)
0 80 mm
NO
Suspension oil 10W or equivalent
310 cm
3
112 mm
299.4 mm
Steering
Steering bearing type
Angular ball bearings
Rear suspension
Suspension type
Rear shock absorber assembly type
Rear shock absorber assembly travel
Spring
Free length
Installed length
Spring rate (K1)
Spring stroke (K1)
Optional spring available
Swingarm
Coil spring/oil damper
70 mm
228.5 mm
207.5 mm
17.7 N/mm (1.8 kg/mm)
0 40 mm
No
To Next Page