You have received a license key from Yaskawa. The activation of the license in your CPU
takes place according to the following procedure:
1. If there is no container for licenses yet, create one under ‘Administration
è License Management è Tab: Advanced Options’ and click at [Create Container]
to create a new container.
2. Go to the tab: ‘Offline Activation’ .
3.
Download the corresponding ‘licence context file’ *.WibuCmRaC to your PC with
and start the activation process via the button [Next].
4. On your PC, open the web page https://lc.codemeter.com/74390/depot/index.php.
5. Enter your license key at Ticket and click at [Next].
ð
Your license is listed.
6. Click at [Activate Licenses].
ð
The wizard for activation via file transfer is opened.
7.
Mark the relevant license with .
8. Select the previously loaded ‘license context’ file *.WibuCmRaC and click at
[Start Activation Now].
9. Click at [Download License Update File Now] and save the ‘Licence update’ as a
*.WibuCmRaU file on your PC.
10. Switch back to the tab ‘Offline Activation’ in the WBM, select the *.WibuCmRaU file
and click at [Upload].
ð
The license update is added to the license container.
11.
Download the “Licence receipt" as a *.WibuCmRaR file to your PC with .
12. Switch back to the wizard from https://lc.codemeter.com/74390/depot/index.php.
13. Select the *.WibuCmRaR file and click at [Upload Receipt Now] and click at [Next].
ð
The licence is activated and listed at ‘My Licenses’ as ‘Activated’ .
14. Restart your CPU.
ð
After the start-up, the functionalities activated by means of a license are avail-
able.
Please note that if you have purchased a PROFINET license, you must
activate the PROFINET functionality in WBM in the configuration after
activation.
Ä
Chap. 4.9.4.3 ‘System Services’ page 87
Steps of activation
iC9200 Series
Deployment
Web-based management - WBM > Administration
HB700 | CPU | PMC921xEx | en | 23-06 112
To Next Page
Loading...
