n
o4-17: Real-Time Clock Setting
No. Name Setting Range Default
o4-17 Set/Reset Real-Time Clock 0 to 2 0
Setting 0: — —
No Setting (Default)
Setting 1: Set
When o4-17 is set to 1, the digital operator will show the Clock Adjustment display. In Clock Adjustment Mode the user can
adjust the Real-Time Clock.
Setting 2: Reset
When o4-17 is set to 2, the Real-Time Clock data is cleared. A TIM fault will occur until o4-17 is set to 1 and the Real-Time
Clock is set.
n
o4-20: Time Display Format
No. Name Setting Range Default
o4-20 Time Display Format 0, 1 0
Sets the time display format.
Setting 0: 12-Hour
Setting 1: 24-Hour
5.10 o: Operator Related Settings
222
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
To Next Page
Loading...
