Start-Up Programming & Operation
This chapter explains startup procedures and digital operator keypad functions, and gives instructions
on programming the drive for initial operation and other important functions.
4.1 SECTION SAFETY.................................................................................................64
4.2 DRIVE START-UP PREPARATION.......................................................................66
4.3 POWERING UP THE DRIVE..................................................................................68
4.4 USING THE STANDARD DIGITAL LED OPERATOR..........................................69
4.5 THE DRIVE AND PROGRAMMING MODES.........................................................73
4.6 USING THE OPTIONAL HOA KEYPAD................................................................74
4.7 PUMP APPLICATION PRESETS...........................................................................86
4.8 IQPUMP PRESETS AND FUNCTIONS.................................................................87
4.9 AUTO-TUNING.....................................................................................................101
4.10 NO-LOAD OPERATION TEST RUN....................................................................104
4.11 TEST RUN WITH LOAD CONNECTED...............................................................105
4.12 VERIFYING PARAMETER SETTINGS AND BACKING UP CHANGES............106
4.13 TEST RUN CHECKLIST.......................................................................................108
4
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
63
To Next Page
Loading...
