YASKAWA LA500 - Drive Start-Up; User-Parameter Menu Setup; General Purpose Setup Parameters

1 English
22 YASKAWA TOMPYEULA5001C LA500 Installation and Operation Instructions
Table 1.4 Crimp Ferrule Models and Sizes
Wire Gauge
mm
2
(AWG)
Model L (mm) L1 (mm) φd1 (mm) φd2 (mm)
0.25 (24) AI 0.25-8YE 12.5 8 0.8 2.0
0.34 (22) AI 0.34-8TQ 12.5 8 0.8 2.0
0.5 (20)
AI 0.5-8WH,
AI 0.5-8OG
14 8 1.1 2.5
◆ Drive Start-Up
■ Set up the Drive with User-Parameter Menu
Drive parameters are in letter groups from A to U. Setup Mode contains only the most
frequently used parameters to help you set up the drive more easily.
Figure 1.8 Parameters in General-Purpose Setup Mode
Table 1.5 shows the parameters available in Setup Mode. To access parameters not shown in the
Setup Mode, use the menu.
Table 1.5 Parameters in General-Purpose Setup Mode
User Parameter Parameter Name
A2-01 A1-00 Language Selection
A2-02 A1-02 Control Method Selection
A2-03 d1-18 Speed Reference Selection Mode
A2-04 d1-19 Nominal Speed
A2-05 d1-23 Releveling Speed
A2-06 d1-24 Inspection Operation
A2-07 d1-25 Rescue Operation Speed
A2-08 d1-26 Leveling Speed
A2-09 d1-01 Speed Reference 1
A2-10 d1-02 Speed Reference 2
A2-11 d1-03 Speed Reference 3
A2-12 d1-04 Speed Reference 4
A2-13 d1-05 Speed Reference 5
A2-14 d1-06 Speed Reference 6