1-2
170904-1CD
HW1482870
1 Product Confirmation
1.2 Order Number Confirmation
MPL80
II
1.2 Order Number Confirmation
Check that the order number of the manipulator corresponds to the
DX200. The order number is located on a label as shown below.
Fig. 1-1: Location of Order Number Labels
THE MANIPULATOR AND THE CONTROLLER
SHOULD HAVE SAME ORDER NUMBER.
ORDER NO.
Check that the manipulator
and the DX200 have the
same order number.
Label (Enlarged View)
(a) DX200 (Front View) (b) Manipulator (Side View)
To Next Page
Loading...
