1 Product Confirmation
1.2 Order Number Confirmation
1-2
167109-1CD
HW1482308
MS165
1.2 Order Number Confirmation
Check that the order number of the manipulator corresponds to the
DX200. The order number is located on a label as shown below.
Fig. 1-1: Location of Order Number Labels
THE MANIPULATOR AND THE CONTROLLER
SHOULD HAVE SAME ORDER NUMBER.
ORDER NO.
Check that the manipulator
and the DX200 have the
same order number.
Label (Enlarged View)
(a) DX200 (Front View)
A
0RWRPDQᮏయࢥࣥࢺ࣮ࣟࣛࡣࠊୗグ
࢜㸫ࢲࡢྠ୍1R᥋⥆ࡋᚚ⏝㢪࠸ࡲࡍࠋ
25'(512
View A (Enlarged View)
(On the manipulator manufatctured after Feb. 2016)
(b) Manipulator (Top View)
(b) Manipulator (Side View)
(On the manipulator manufactured by Jan. 2016)
To Next Page
Loading...
