YASKAWA RM2-755/1255SL - Transporting Method

2-8
166006-1CD
166006-1CD
2 Installation
2.3 Positioner Installation
RM2-755/1255SL
Positioner
2.3.3 Transporting Method
The Positioner can be transported by either:
• overhead crane (section 2.3.3.1)
• two forklifts (section 2.3.3.2)
WARNING
• Sling applications and crane or forklift operations must be
performed by authorized personnel only.
Failure to observe this WARNING may result in injury or damage.
• Never place any part of your body under a suspended load or move
a suspended load over any part of another person’s body.
A shifted or dropped load could result in serious injury or death.
CAUTION
• Avoid excessive vibration or shock during transportation.
The system consists of precision components.
Failure to observe this caution may adversely affect the performance.
• Do not ship or move Positioner in or around plant without shipping
brackets and alignment bar installed.
Failure to observe this caution may cause damage to the system.
31 of 145