7-1
166006-1CD
166006-1CD
7 Recommended Spare Parts
RM2-755/1255SL
Positioner
7 Recommended Spare Parts
It is recommended that the parts and components in the following table be
kept in stock as spare parts for the Positioner. Product performance can
not be guaranteed when using spare parts from any company other than
Yaskawa. The spare parts are ranked as follows:
• Rank A: Expendable and frequently replaced parts
• Rank B: Parts for which replacement may be necessary as a result of
frequent operation
• Rank C: Drive Unit
To order spare parts or replacement parts for the Positioner, contact
Customer Support. (Refer to section 1.7 “Customer Support Information”
on page 1-6).
NOTICE
To replace parts in Rank B or Rank C, contact Customer Support.
(Refer to section 1.7 “Customer Support Information” on page 1-6).
Table 7-1: Spare Parts for the RM2-755/1255SL Positioner
Rank Part No's. Name Qty Qty
per
Unit
Remarks
A 132412-1
Molywhite R00
Grease
-
For speed reducer of
each axis
A 180144-1
Mobil CM-P,
Lithium
Complex
Grease
-
Slewing S1 Gear and
Pinion Axis, tailstock
swingarm main axis
bearing, and
motomount bearing
A 132177-*
Gadus S2 V220
2
-
Slewing bearing
raceway.
A 144370-1
Weld
Ground
Brush Post
4 1
For Positioner
A 144372-1
Weld
Ground
Brush Holder
4 1
For Positioner
A 144371-1
Brush
4 1
For Positioner
A 479348-2
Battery Pack
1 3
Backup
A 182169-1
Switch,Pressure
,75-300psi,1/8
1 1
Lubricator
NOTICE
The motor and reducer are not recommended for field service. The unit
should be returned to Yaskawa for repairs to these components.
To Next Page
Loading...
Need help?
General
