7-1
7
7
Operation
This chapter explains the JOG operation, parameter settings, and the Multiturn
Limit setting when using the digital operator. For more information on operat-
ing methods, refer to the MEI SynqNet controller manuals.
7.1 Trial Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7-2
7.1.1 Digital Operator Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-2
SIEPS80000025.book 1 ページ ２００４年１０月２５日 月曜日 午前１１時５７分
To Next Page
Loading...
