Yealink SIP-T40G User Manual

User Guide for T4 Series IP Phones
106
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Edit to accept the change.
Deleting a Replace Rule
Procedure:
1. Click Settings->Dial Plan->Replace Rule.
2. Select one or more replace rules by checking the checkbox(es).
3. Click Del to delete the replace rule(s).
Configuring the Dial Now
You can configure up to 100 dial now rules on your phone. When the dialed number matches
the dial now string, the number will be dialed out automatically. For example, a dial now rule is
configured as "2xx", any entered three-digit string beginning with 2 will then be dialed out
automatically on the phone.
Adding a Dial Now Rule
Procedure:
1. Click Settings->Dial Plan->Dial Now.
2. Enter the desired value (for example, 2xx) in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
Downloaded from ManualsNet.com search engine

Yealink SIP-T40G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	No
Security algorithms	AES, HTTPS, SSL/TLS
Networking standards	IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP, TFTP, HTTP, HTTPS
Voice codecs	G.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.6 W
Certification	CE, FCC, ISO 9001
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Volume control	Digital
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	54 mm