Yealink SIP-T40G

Customizing Your Phone
49
Procedure:
1. Navigate to Menu->Basic->Display->Transparency.
2. Select the desired value from the pull-down list of Transparency.
3. Tap Save.
Transparency is configurable via web user interface at the path Settings->Preference.
Screen Saver
The screen saver will automatically start when the IP phone is idle for the preset waiting time.
The screen saver will be stopped if one of the following phone events occurs:
 Press any key.
 Tap the touch screen (on the SIP-T48S/T48G IP phone).
 Pick up/hang up the handset.
 There is an incoming call.
 A new prompt (for example, missed call, new voice mail or forwarded call).
 The status of BLF key changes.
Downloaded from ManualsNet.com search engine