Yealink SIP-T40G

Overview
13
Icon indicators (associated with contact)
Icon
Description
T48S/T48G
T46S/T46G
T42S/T42G/T41S/
T41P/T40G/T40P
/
The default contact icon
The default contact photo
The default Bluetooth contact
icon
LED Instructions
Power LED Indicator
Power LED Indicator
LED Status
Description
Solid red
The phone is initializing.
Fast-flashing red (300ms)
The phone is ringing.
Slow-flashing red (1s)
The phone receives a voice mail or text message.
Solid red for 500ms and off for
3000ms alternately
The phone enters power-saving mode.
It is only available on the SIP-T48S/T48G/T46S/T46G IP
phone.
Off
The phone is powered off.
The phone is idle.
The phone is busy.
The call is placed on hold by you or by the remote party.
The call is muted.
Note
The above is the default LED status, since the status of the power LED indicators may be
configured by your system administrator. For more information, please contact your system
administrator.
Downloaded from ManualsNet.com search engine