EasyManuals Logo

Yealink SIP-T40G User Manual

Yealink SIP-T40G
253 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #137 background imageLoading...
Page #137 background image
Basic Call Features
125
2. Press the MUTE key again to unmute.
Note
Call Hold/Resume
You can place an active call on hold. Only one active call can be in progress at any time. Other
calls can be made and received while placing the original call on hold. The phone will play beep
of a specified frequency softly to remind you that you still have a call on hold. Your system
administrator can customize the frequency and configure when to play beep.
Note
Holding a Call
Procedure:
1. Press the HOLD key or Hold during a call.
The LCD screen indicates that the call is on hold.
Note
Resuming a Held Call
Procedure:
1. Press the HOLD key again or Resume.
If multiple calls are placed on hold, do one of the following:
The phone ignores engaged audio device (handset or headset) and plays beep in the
Speakerphone mode by default. The Speakerphone key will light up for 1 second along with the
beep except on SIP-T40G/T40P IP phone.
You can also mute the microphone when the IP phone is ringing.
If Music on Hold is enabled, the held party will hear a piece of music from IP PBX while
waiting. Check with your system administrator to find out if this feature is enabled on your
phone.
Downloaded from ManualsNet.com search engine

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals