Yealink SIP-T40G User Manual

User Guide for T4 Series IP Phones
142
When the conference is placed on hold, you can press New Call (NewCall) to place a new
call.
2. Press the HOLD key again or Resume to resume the held conference call.
Muting and Unmuting a Conference Call
You can mute the local microphone during a conference call so that the other two participants
can hear each other except you.
Procedure:
1. Press the MUTE key to mute the conference.
2. Press the MUTE key again to unmute the conference.
Splitting a Conference Call
You can split the conference call into two individual calls. After you split a conference call, the
conference call is ending, and the other two parties are held. You can resume one of the hold
calls.
Procedure:
1. Press Split.
Managing Conference Participants
You can manage conference participants in the following ways:
 Mute a participant
 Hold a participant
 Remove a participant from the conference
Procedure:
On the SIP-T46S/T46G/T42S/T42G/T41S/T41P/T40G/T40P IP phone, press Manage, and then
select the desired party, you can do the following:
 Press Far Mute (FarMute) to mute the party. The muted party can hear everyone, but no
one can hear the muted party.
 Press Far Hold (FarHold) to hold the party. The held party cannot hear anyone, and no
one can hear the held party.
 Press Remove to remove the party from the conference call.
 Press Back to return to the previous screen.
On the SIP-T48S/T48G IP phone, you can do the following:
- Tap to mute the party. The muted party can hear everyone, but no one can hear the
muted party. The icon changes to .
Downloaded from ManualsNet.com search engine

Yealink SIP-T40G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	No
Security algorithms	AES, HTTPS, SSL/TLS
Networking standards	IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP, TFTP, HTTP, HTTPS
Voice codecs	G.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.6 W
Certification	CE, FCC, ISO 9001
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Volume control	Digital
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	54 mm