Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
86
URL within 511 characters
Settings->Auto Provision->Server URL
static.auto_provision.server.username
It configures the user name for provisioning server access.
String within 32 characters
Settings->Auto Provision->User Name
static.auto_provision.server.password
It configures the password for provisioning server access.
String within 32 characters
Settings->Auto Provision->Password
Configuring a Provisioning Server
The provisioning server can be set up on the local LAN or anywhere on the Internet. Use the following
procedure as a recommendation if this is your first provisioning server setup.
To set up the provisioning server:
1. Install a provisioning server application or locate a suitable existing server, such as 3CDaemon.
2. Create an account and home directory.
3. Set security permissions for the account.
4. Create boot files and configuration files, and then edit them as desired.
5. Copy the boot files, configuration files and resource files to the provisioning server.
6. If performing static provisioning, obtain the provisioning server address.
Typically, all phones are configured with the same server account, but the server account provides a means
of conveniently partitioning the configuration. Give each account a unique home directory on the server and
change the configuration on a per-line basis.
To Next Page
Loading...
