Call Features
307
Anonymous Call Configuration
The following table lists the parameters you can use to configure anonymous call.
account.X.anonymous_call
[1]
It triggers the anonymous call feature to on or off.
0-Off
1-On, the IP phone will block its identity from showing to the callee when placing a
call. The callee’s phone LCD screen presents “Anonymous” instead of the caller’s
identity.
Account->Basic->Anonymous ( “account.X.anonymous_call.server_base_only” must
not be left blank)
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Anonymous->Line X->Anonymous
( “account.X.anonymous_call.server_base_only” must not be left blank)
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Features->Anonymous Call->Anonymous
(“account.X.anonymous_call.server_base_only” must not be left blank)
account.X.send_anonymous_code
[1]
It configures the IP phone to send anonymous on/off code to activate/deactivate the
server-side anonymous call feature for account X.
0-Off Code, the IP phone will send anonymous off code to the server when you
deactivate the anonymous call feature.
1-On Code, the IP phone will send anonymous on code to the server when you
activate the anonymous call feature.
Account->Basic->Send Anonymous Code
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Anonymous->LineX->Send Anony Code
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Features->Anonymous Call->Send Anonymous Code
account.X.anonymous_call.server_base_only
[1]
It enables or disables the IP phone to perform the anonymous call feature on
server-side only.
Note: You need to configure parameters “account.X.anonymous_call_oncode” and
To Next Page
Loading...
Need help?
General
