Call Features
343
Features->Forward&DND->Forward->AccountX->No Answer Forward->After Ring
Time(0~120s)
Menu->Features->Call Forward->AccountX->No Answer Forward->After Ring Time
account.X.timeout_fwd.on_code
[1]
It configures the no answer forward on code to activate the server-side no answer
forward feature.
The IP phone will send the no answer forward on code and the pre-configured
destination number (configured by the parameter “account.X.timeout_fwd.target”) to
the server when you activate no answer forward feature on the IP phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the
parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to T19(P) E2 IP
phones.
String within 32 characters
Features->Forward&DND->Forward->AccountX->No Answer Forward->On Code
Menu->Features->Call Forward->AccountX->No Answer Forward->On Code
account.X.timeout_fwd.off_code
[1]
It configures the no answer forward off code to deactivate the server-side no answer
forward feature.
The IP phone will send the no answer forward off code to the server when you
deactivate no answer forward feature on the IP phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the
parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to T19(P) E2 IP
phones.
String within 32 characters
Features->Forward&DND->Forward->AccountX->No Answer Forward->Off Code
Menu->Features->Call Forward->AccountX->No Answer Forward->Off Code
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for
T41P/T41S/T27P/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2.
Call Forward Synchronization for Server-side Configuration
Call forward synchronization feature provides the capability to synchronize the status of the call forward
features between the IP phone and the server.
To Next Page
Loading...
