Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
150
The following shows a portion of the softkey layout file “CallFailed.xml”:
3. For each soft key that you want to disabled, just move the string from the enabled soft key list to
disabled soft key list.
The following shows a portion of the softkey layout file “CallFailed.xml”:
4. Save the change and place this file to the provisioning server.
Softkey Layout Configuration
The following table lists the parameters you can use to configure the softkey layout.
phone_setting.custom_softkey_enable
It enables or disables the custom soft keys layout feature.
To Next Page
Loading...
