Phone Customization
139
2. Click Add button to open a *.bmp file.
You can repeat the step 2 to add multiple original picture files.
3. Click the Convert button.
Then you can find the DOB logo files in the adv directory.
Custom Logo Configuration
The following table lists the parameters you can use to configure custom logo.
phone_setting.lcd_logo.mode
It configures the logo shown on the LCD screen.
Note: It is not applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
0-Off, the IP phone is not allowed to display a logo.
1-System Logo, the LCD screen will display the system logo.
2-Custom Logo, the LCD screen will display the custom logo (you need to upload a
custom logo file to the IP phone).
To Next Page
Loading...
