Yealink T27G

Phone Customization
119
Topics
Linekey Length Shorten Rules
Linekey Length in Short Configuration
Linekey Length Shorten Rules
If you configure the phone to display 2 characters, the display will match the rules below:
Label
Short Label
Description
Any string or Blank
Configured
(for example,
aLine1)
“Short Label” has higher priority than
“Label”. If the value of “Short Label” is
configured, the value of “Label” is ignored.
Display the first two characters of the short
label (for example, aL).
Configured
(for example, aLine1)
(for example, sunny)
Blank
• If the label contains uppercase characters
or digits, only the uppercase characters
and digits are displayed. It displays two
characters from left to right (for example,
L1).
• else, it displays the first two characters of
the label (for example, su).
If both left blank, the default label is used.
The display rule is the same as above.
Blank
Blank
Linekey Length in Short Configuration
The following table lists the parameters you can use to configure linekey length in short.
Parameter
features.config_dsskey_length.shorten
<y0000000000xx>.cfg
Description
It configures the label length in short of line key displayed on LCD screen when the
phone places a call, receives a call, is during a call, or is idle (if large DND icon is