Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
134
Day of Week: 1=Monday, 2=Tuesday,…, 7=Sunday
Hour of Day: 0=0am, 1=1am,…, 23=11pm
Settings->Time & Date->End Date
It configures the offset time (in minutes) of Daylight Saving Time (DST).
Note: It works only if the value of the parameter “local_time.summer_time” is set to 1
(Enabled).
Settings->Time & Date->Offset(minutes)
It configures the access URL of the DST file (AutoDST.xml).
Note: It works only if "local_time.summer_time" is set to 2 (Automatic).
URL within 511 characters
For example, tftp://192.168.1.100/AutoDST.xml
Time and Date Manually Configuration
You can set the time and date manually when the phones cannot obtain the time and date from the NTP
time server.
The following table lists the parameter you can use to configure time and date manually.
local_time.manual_time_enable
It enables or disables the IP phone to obtain time and date from manual settings.
0-Disabled (obtain time and date from NTP server)
1-Enabled (obtain time and date from manual settings)
Settings->Time & Date->Manual Time
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Time & Date->General->Manual Settings
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
To Next Page
Loading...
Need help?
General
