Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
168
“Line”, “BLF”, “ReCall”, “Hold” types are available when you configure line keys.
To remove a function type, specify line key type IDs which start with symbol “-”. For
example, “-14, 5, 2” means to remove “Intercom”, “DND”, “Forward” types from the
line key types list. These line key types are not available when you configure line keys.
Note: Multiple line key type IDs are separated by commas. “N/A” type is always kept.
blank or 0 (all valid function types are available);
line key type IDs.
For supported line key types and IDs, refer to Supported Dsskey Types.
It configures key feature.
Note: It is not applicable to T19(P) E2 IP phones.
0-N/A
1-Conference
2-Forward
3-Transfer
4-Hold
5-DND
7-ReCall
8-SMS
9-Pick up
10-Call Park
11-DTMF
12-Voice Mail
13-Speed Dial
14-Intercom
15-Line
16-BLF
17-URL
18-Group Listening
20-Private Hold
22-XML Group
23-Group Pickup
24-Paging
25-Record
27-XML Browser
34-Hot Desking
35-URL Record
38-LDAP (only appear when
“ldap.enable=1”)
39-BLF List
40-Prefix
41-Zero Touch
42-ACD
45-Local Group
50-Phone Lock
56-Retrieve Park
61-Directory
66-Paging List
73-Custom Key (only available when
“features.enhanced_dss_keys.enable=1”)
77-Mobile Account (only applicable to
T52S/T54S IP phones when the
Bluetooth-Enabled mobile phone is
connected)
Note: The permitted values are configurable by “linekey.type_range.custom”.
T54S/T48S/T48G/T46S/T46G/T29G: X= 1-16;
T52S/T42S/T42G: X = 1-12;
T41S/T41P/T27P/T27G: X = 1-6;
T40P/T40G/T23P/T23G/T21(P) E2: all line keys.
Dsskey->Line Key->Line KeyX->Type
To Next Page
Loading...
