Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
170
Menu->Features->DSS Keys->Line Key X->Label
It configures the short label displayed on the LCD screen.
Note: It is only applicable to T52S IP phones.
String within 99 characters
Dsskey->Line Key->Line KeyX->Short
It configures the short label displayed on the LCD screen.
Note: It is only applicable to T52S IP phones.
For multicast paging:
It configures the channel of multicast paging group.
For BLF/BLF list/intercom feature:
It configures the pickup code.
Note: It is only applicable when “linekey.X.type” is set to 14, 16, 24 or 39. It is not
applicable to T19(P) E2 IP phones.
For multicast paging:
0 to 31
For BLF/BLF list/intercom feature:
String within 256 characters
Dsskey->Line Key->Line KeyX->Extension
Menu->Features->DSS Keys->Line Key X->Channel or
Menu->Features->DSS Keys->Line Key X->PIN/ID or
Menu->Features->DSS Keys->Line Key X->Extension
linekey.X.xml_phonebook
[1]
It specifies a specific group/phone book when multiple groups/phone books are
configured on the IP phone.
For example, Remote Phone Book 1 “Sell” and Remote Phone Book 2 “Market” are
configured on the phone, you can configure “linekey.X.xml_phonebook = 0” to specify
the Remote Phone Book 1 “Sell” for the specific line key. The user can press this line
key to access the Remote Phone Book 1 “Sell”.
Note: It is only applicable when “linekey.X.type” is set to 22 or 45. It is not applicable
to T19(P) E2 IP phones.
To Next Page
Loading...
