Yealink T27G

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
178
X=3, default: 5 – DND
X=4, default: 30 - Menu
X=5, default: 28- History
X=6, default: 61- Directory
X=7, default: 51- Switch Account Up
X=8, default: 52- Switch Account
Down
X =11, default: 0 – NA
X=12, default: 0 - NA
X=13, default: 0 – NA
X=14, default: 2- Forward
X=17, default: 0 – NA
X=18, default: 0 – NA
Web UI
Dsskey->Programmable Key->Type
Parameter
programablekey.X.history_type
[1]
<y0000000000xx>.cfg
Description
It configures the history type of programmable key.
For more information, refer to Programmable Key sheet.
Permitted
Values
0-Local History
1-Network History
Default
0
Web UI
Dsskey->Programmable Key->Line
Parameter
programablekey.X.line
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the programmable key feature.
Note: It is not applicable to T19(P) E2 IP phones.
Permitted
Values
T48G/T48S/T54S/T46G/T46S/T29G: 1-16;
T52S/T42S/T42G: 1-12;
T41S/T41P/T27P/T27G: 1-6;
T40P/T40G/T23P/T23G: 1-3
T21(P) E2: 1-2
Default
1
Web UI
Dsskey>Programmable Key->Line
Parameter
programablekey.X.value
[1]
<y0000000000xx>.cfg
Description
It configures the value for some programmable key features.
Note: You need to configure this parameter when “programablekey.X.type” is set to 2,
9, 13, 14, 23, 24, 27, 40 or 73.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Dsskey->Programmable Key->Value
Parameter
programablekey.X.label
[1]
<y0000000000xx>.cfg