Yealink T27G

Phone Customization
185
Macro Action
Description
can configure this parameter according to the
system-defined softkey ID. If the softkey ID is not defined
on the phone or there is no matched soft key on the
current screen, the execution of the action string will be
ignored. The softkey ID is case-insensitive.
Example: $Sanswer$ means pressing the Answer soft
key.
Yealink IP phones support customizing soft keys. When
invoking a custom soft key, the prefix “#” must be added.
Example: If the custom softkey label is IVR1, the custom
softkey id is custom_macro, then
$S#custom_macro$ means pressing the IVR1 soft key.
Note: To view the softkey ID, you can set
“ features.enhanced_dss_keys.enable ” and
“ edk.id_mode.enable ” to 1 (Enabled) and then long press
the Volume Up key when the phone is idle.
$K<key name>$
The functionality of performing this action is the same as
that of pressing the desired hard key.
Supported key names include:
 LineKeyX (for T48S/G, X=1-29; for
T54S/T46S/T46G/T29G, X=1-27; for
T42S/T42G/T41S/T41P, X=1-15; for T52S/T27P/T27G,
X=1-21; for T40P/T40G/T23P/T23G, X=1-3; for
T21(P) E2, X=1-2).
 SoftKeyX (X ranges from 1 to 4)
 ArrowUp
 ArrowDown
 ArrowLeft
 ArrowRight
 VolDown
 VolUp
 Cancel
 OK
 DialPadX (X ranges from 0 to 9)
 DialPadPound
 DialPadStar