Yealink T27G

Account Settings
237
Parameter
static.features.default_account
<y0000000000xx>.cfg
Description
It configures the default account.
1-Account 1
2-Account 2
3-Account 3
…
16-Account 16
For T54S/T48S/T48G/T46S/T46G/T29G, accounts 1-16.
For T52S/T42G/T42S, accounts 1-12.
For T41P/T41S/T27P/T27G, accounts 1-6.
For T40P/T40G/T23P/T23G, accounts 1-3.
For T21(P) E2, accounts 1-2.
Note: It is not applicable to T19(P) E2 IP phones.
Permitted
Values
Integer from 1 to 16
Default
1
Parameter
features.show_default_account
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to display the label of the default account in the
left of the status bar on the idle screen.
Note: For T42G/T42S/T41P/T41S/T27P/T27G IP phones, the label of the default
account is displayed in the middle bottom of the idle screen. It works only if
“features.station_name.value” is left blank.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
features.linekey_call_with_default_account
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to switch the default account when pressing the
line key to dial.
For example, account on line 2 is not the default account, if this feature is enabled,
when pressing the line key 2 to dial, the default account will switch to the account on
line 2.
Note: It is not applicable to T19(P) E2 IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default
0