Yealink T27G

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
292
configured by the parameter “dialplan.digitmap.active.on_hook_dialing”.
Permitted
Values
0-Disabled
1-Enabled
Default
Blank
Parameter
account.X.dialplan.digitmap.apply_to.on_hook_dial
[1]
<MAC>.cfg
Description
It enables or disables the entered number to match the predefined string of the digit
map after pressing a send key on the pre-dialing screen or pressing the DSS key (for
example, speed dial, BLF or prefix DSS key).
To enter the pre-dialing screen, directly enter numbers when the phone is idle.
Note: It works only if “account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The
value configured by the parameter
“account.X.dialplan.digitmap.apply_to.on_hook_dial” takes precedence over that
configured by the parameter “dialplan.digitmap.apply_to.on_hook_dial”.
Permitted
Values
0-Disabled
1-Enabled
Default
Blank
Parameter
account.X.dialplan.digitmap.apply_to.directory_dial
[1]
<MAC>.cfg
Description
It enables or disables the digit map to be applied to the numbers dialed from the
directory.
Note: It works only if “account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The
value configured by the parameter
“account.X.dialplan.digitmap.apply_to.directory_dial” takes precedence over that
configured by the parameter “dialplan.digitmap.apply_to.directory_dial”.
Permitted
Values
0-Disabled
1-Enabled
Default
Blank
Parameter
account.X.dialplan.digitmap.apply_to.history_dial
[1]
<MAC>.cfg
Description
It enables or disables the digit map to be applied to the numbers (received calls or
missed calls) dialed from call log lists.
Note: It works only if “account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The
value configured by the parameter “account.X.dialplan.digitmap.apply_to.history_dial”
takes precedence over that configured by this parameter.
Permitted
Values
0-Disabled
1-Enabled
Default
Blank