Yealink T27G

Call Features
335
The IP phone will send the always forward on code and the pre-configured destination
number (configured by the parameter “forward.always.target”) to the server when you
activate always forward feature on a phone basis.
Note: It works only if “features.fwd.allow” and “forward.always.enable” are set to 1 and
value of the parameter “features.fwd_mode” is set to 0 (Phone) (except T19(P) E2 IP
phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward&DND->Forward->Always Forward->On Code
Phone UI
Menu->Features->Call Forward->Always Forward->On Code
Parameter
forward.always.off_code
<y0000000000xx>.cfg
Description
It configures the always forward off code to deactivate the server-side always forward
feature.
The IP phone will send the always forward off code to the server when you deactivate
always forward feature on a phone basis.
Note: It works only if “features.fwd.allow” and “forward.always.enable” are set to 1 and
value of the parameter “features.fwd_mode” is set to 0 (Phone) (except T19(P) E2 IP
phones).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Forward&DND->Forward->Always Forward->Off Code
Phone UI
Menu->Features->Call Forward->Always Forward->Off Code
Parameter
forward.busy.enable
<y0000000000xx>.cfg
Description
It triggers the busy forward feature to on or off on a phone basis.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and value of the
parameter “features.fwd_mode” is set to 0 (Phone) (except T19(P) E2 IP phones).
Permitted
Values
0-Off
1-On, incoming calls are forwarded to the destination number (configured by the
parameter “forward.busy.target”) when the callee is busy.
Default
0
Web UI
Features->Forward&DND->Forward->Busy Forward->On/Off
Phone UI
Menu->Features->Call Forward->Busy Forward->Busy Forward
Parameter
forward.busy.target
<y0000000000xx>.cfg