Yealink T27G

Audio Features
367
Alert-Info: ringtone-2;x-line-id=1
Alert-Info: <http://10.1.0.31>;info=ringtone-2
Alert-Info: <http://127.0.0.1/ringtone-2>
Alert-Info: MyMelody2
Alert-Info: MyMelodyRing2.wav
Alert-Info: MyMelody2;x-line-id=1
Alert-Info: <http://10.1.0.31>;x-line-id=0;info=MyMelody2
The following table identifies the corresponding local ring tone:
Value of N
Ring Tone
1
Ring1.wav
2
Ring2.wav
3
Ring3.wav
4
Ring4.wav
5
Ring5.wav
6
Ring6.wav
7
Ring7.wav
8
Ring8.wav
9
Silent.wav
10
Splash.wav
N<1 or N>10
Ring1.wav
Alert-Info: <URL>
When the Alert-Info header contains a remote URL, the IP phone will try to download the WAV ring tone
file from the URL and then play the remote ring tone if “ account.X.alert_info_url_enable ” is set to 1 (or the
item called “Distinctive Ring Tones” on the web user interface is Enabled), or play the preconfigured local
ring tone in about 10 seconds if “ account.X.alert_info_url_enable ” is set to 0 or if the IP phone fails to
download the remote ring tone.
Example:
Alert-Info: http://192.168.0.12:8080/Custom.wav