Yealink T27G - Page 397

Audio Features
377
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this
warning tone, set it to 0.
Permitted
Values
String
Default
Blank
Web UI
Settings->Tones->Congestion
Parameter
voice.tone.callwaiting
<y0000000000xx>.cfg
Description
It customizes the call waiting tone.
The value format is Freq/Duration. For more information on the value format, refer to
the parameter “voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this
warning tone, set it to 0.
Permitted
Values
String
Default
Blank
Web UI
Settings->Tones->Call Waiting
Parameter
voice.tone.dialrecall
<y0000000000xx>.cfg
Description
It customizes the call back tone.
The value format is Freq/Duration. For more information on the value format, refer to
the parameter “voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this
warning tone, set it to 0.
Permitted
Values
String
Default
Blank
Web UI
Settings->Tones->Dial Recall
Parameter
voice.tone.info
<y0000000000xx>.cfg
Description
It customizes the info tone. The phone will play the info tone with the special
information, for example, the number you are calling is not in service.
The value format is Freq/Duration. For more information on the value format, refer to
the parameter “voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this
warning tone, set it to 0.
Permitted
Values
String