Yealink T27G

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
24
Default
0
Web UI
Network->Advanced->VLAN->PC Port->Active
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu-> Advanced (default password: admin) ->Network->VLAN->PC Port->VLAN
Status
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->PC Port->VLAN Status
Parameter
static.network.vlan.pc_port_vid
[1]
<y0000000000xx>.cfg
Description
It configures the VLAN ID for the PC port.
Note: It works only if “static.network.pc_port.enable” is set to 1 (Auto Negotiation)
and “static.network.vlan.pc_port_enable” is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 4094
Default
1
Web UI
Network->Advanced->VLAN->PC Port->VID (1-4094)
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->VLAN->PC Port->VID
Number
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->PC Port->VID Number
Parameter
static.network.vlan.pc_port_priority
[1]
<y0000000000xx>.cfg
Description
It configures the VLAN priority for the PC port.
7 is the highest priority, 0 is the lowest priority.
Note: It works only if “static.network.pc_port.enable” is set to 1 (Auto Negotiation)
and “static.network.vlan.pc_port_enable” is set to 1 (Enabled).
Permitted
Values
Integer from 0 to 7
Default
0
Web UI
Network->Advanced->VLAN->PC Port->Priority
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->VLAN->PC Port->Priority
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)