Yealink T27G - Page 514

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
494
Parameter
action_url.setup_autop_finish
<y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when completing auto provisioning
via power on.
Example:
action_url.setup_autop_finish = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable
value. For Pre-defined events, refer to Pre-defined Events List. For variable value, refer
to Variable Values List.
Default
Blank
Web UI
Features->Action URL->Autop Finish
Parameter
action_url.call_waiting_on
<y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when call waiting feature is enabled.
Example:
action_url.call_waiting_on = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable
value. For Pre-defined events, refer to Pre-defined Events List. For variable value, refer
to Variable Values List.
Default
Blank
Web UI
Features->Action URL->Open Call Waiting
Parameter
action_url.call_waiting_off
<y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when call waiting feature is disabled.
Example:
action_url.call_waiting_off = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable
value. For Pre-defined events, refer to Pre-defined Events List. For variable value, refer
to Variable Values List.
Default
Blank
Web UI
Features->Action URL->Close Call Waiting
Parameter
action_url.headset
<y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends when pressing the HEADSET key.
Example: